Hardi Commander Twin Force Plus Instruction Book Download Page 35

Page: 35 / 94

GB 08 04

Operation

5. Depending on the chemical in question, the Pressure

Manifold can be set on Agitation. If no agitation is

needed, this valve must be closed.

6. Engage the P.T.O. and start the pump.

WARNING:

Do not leave the sprayer whilst

refilling the tank, and keep an eye on the level

gauge in order

NOT

to overfill the tank!

FFFFFilling of

illing of

illing of rinsing tank (if

rinsing tank (if

rinsing tank (if f f f f fitted)

itted)

The rinsing tank is situated under the main tank. Only fill

this tank with clean water.

The rinsing tank is filled through the inlet, situated

beneath the Suction Manifold valves. Water can be

filled directly through the inlet - or through a socket

piece

(optional equipment) connected to a water hose.

Rinsing tank capacity

A water level indicator (limpid hose with floating ball) is

situated beneath the platform.

4. Filling device and Fast filling device used

simultaneously

The Filling Device and the Fast Filling Device can be

used simultaneously - this gives even bigger filling

capacity.

WARNING:

Do not leave the sprayer whilst

refilling the tank, and keep an eye on the level

gauge in order

NOT

to overfill the tank!

NOTE!

Observe local legislation regarding use of Filling

Device. In some areas it is prohibited to fill from open

water reservoirs (lakes, rivers etc.). It is recommended

only to fill from closed reservoirs (mobile water tanks

etc.) to avoid contamination.

WARNING!

If suction hose/filter is carried on the

sprayer during spraying, it can be contaminated

by spray drift, which will be transferred to lake/

river when filling!

5. Quick coupler for external filling

The quick coupler is operated as follows

1. Fit the external water hose to the quick coupler on the

trailer.

2. Close self-cleaning filter.

3. Turn handle on Pressure Manifold towards Main tank.

4. Turn handle on Suction Manifold towards Filling

device.

028

Black

Green

T020-0004

T060-0112

T060-0115

T060-0116

Summary of Contents for Commander Twin Force Plus































































































Search results

Summary of Contents for Commander Twin Force Plus

Reviews:

Related manuals for Commander Twin Force Plus

Brands by name

Popular brands

Hardi Commander Twin Force Plus, Instruction Book

Search results

Summary of Contents for Commander Twin Force Plus

Reviews:

Related manuals for Commander Twin Force Plus

Brands by name

Popular brands