26
GB 05 09 02
Sprayer setup
The work light lamp
B
is also mounted to the railing of
the platform above the MANIFOLD valves. This lamp is
positioned to lighten the HARDI the MANI-
FOLD system.
It is recommended to switch of the rear lights of the
tractor in order to save power consumption and to avoid
reflection.
Power supply is via the 7-pin socket. Please see the
Installation Instruction
in the part
Technical specifica-
tions
.
Selector switch
When mounting the selector switch A it is simply
clicked into the cutout in the frame below the MANI-
FOLD valves an is thereby fastened to the frame.
The switch has three positions:
1. Boom lights ON
2. Lights OFF (neutral)
3. Work light ON
Connection box
The connection box is to be mounted underneath the
platform floor.
1. Lift the platform floor
2. Open the connection box and mount the flat part of
the box
(A)
by 4 screw to the 4 predrilled holes in the
platform floor.
A soap dispenser can be fitted in a device on the inside
of the locker door.
IMPORTANT! Although this locker is situated in the non-
contaminated zone of the sprayer and is meant for
storing nontoxic items, it must
never
be used for storing
food, beverage or other things meant for consumption.
Boom and W
Boom and W
Boom and W
Boom and W
Boom and Wor
or
or
or
ork lights (if
k lights (if
k lights (if
k lights (if
k lights (if f f f f fitted)
itted)
itted)
itted)
itted)
The 2 boom light lamps
A
are mounted to the railing of
the platform (one at each side) and are positioned to
lighten both boom wings.
T060-0112
T040-0000
T040-0001
A
T271-0009
Boom light
(A)
Work light
(B)
T060-0111
Two compartments
T060-0110
