6.
Remove the 4 supplemental mounting plates from the 4 corners of the bed.
7.
Remove the screws for the foot and head attachment. There a total of 4 screws.
8.
Attach the head and foot ends to the spring frame. Tap the corner lock on the end with a mallet and wood block
until they are firmly seated in the corner lock on the spring frame.
9.
Make sure the hole of the head and foot ends align with the spring frame hole. Then using the locking screw which
was removed in
step 7
, screw and tighten the two components together as shown below.
Summary of Contents for Stockton N1035P
Page 6: ......
