13.
Pick up side frames and place the slide rod extensions into the lower crib eyes as shown below.
Pick up side frame Place slide rod stem into lower crib eye hole Completion of attachment
14.
a
. Push down on each end of the side frame to engage the square bushing into the upper crib eye.
b
. Place washer on top of crib eye and then tighten the locking screws at the top of each slide rod extension.
c
. Repeat procedure for all 4 slide rod extensions. (Total of 4 screws & 4 washers).
Ensure side frame is under crib eye Tighten side frame to bed using bolt and spacer
Completion of step
15.
Assembled N1035/N2085 Stockton Bed shown below.
Summary of Contents for Stockton N1035P
Page 6: ......