1.
Unpack the bed, head board, foot board, and side frames out of the box.
2.
Attach the 4 supplemental mounting plates to the top frame as shown in the pictures below.
3.
Attach the 4 casters to the bed with the 4 bolts
contained in the box.
4.
Roll the bottom frame under the top frame as shown in the picture below.
5.
a
. Remove the 8 bolts and nuts located on both sides of the bed frame.
b
. Connect the bottom and top frame by installing and tightening the 8 bolts which were removed in
a
.
Instructions for the Assembly of N1035/N2085 Stockton Bed (Manual)
Summary of Contents for Stockton N1035P
Page 6: ......
