ASSEMBLY INSTRUCTIONS FOR
MODEL #20045
UNIVERSAL PET BARRIER
1.
Remove the “Molded Foot Insert” (D) from
each “Molded Foot” (C) and set aside.
2.
Place both “Barrier Bar Assemblies” (A) onto a
flat surface with the “Hollow Plastic Links”
facing upward. Force the small end of the
“Vertical Support Tubes” (B) through the “Hollow
Plastic Links” of each “Barrier Bar Assembly”
(A) Press a “Molded Foot” (C) onto the small
end
of each “Vertical Support Tube” (B).
3.
Using the “Molded Foot Inserts”(D) (set aside
in step 1) force an “Insert“ (D) onto each end
of the “Threaded Rods” (E). With the
assembled “Threaded Rod” (E) positioned as
shown at right, press a “Molded Foot” (C) onto
the “Molded Foot Insert” (D).
4.
Place the “Threaded Rod Assemblies” (E) into
the open ends of the “Vertical Support Tubes” (B).
C
D
WING NUT
D
E
C
B
D
E
CUT HERE
PARTS LIST
ITEM DESCRIPTION
QUANTITY
A
BARRIER BAR ASSEMBLY
2
B
VERTICAL SUPPORT TUBE
2
C
MOLDED FOOT
4
D
INSERT –
MOLDED FOOT
4
E
THREADED ROD (WITH WING NUT)
2
F
SCREW
2
A
B
C
A
