10.
a
. Remove the two bolts from pull tube.
b
. Connect the Hi-Lo pull tube with pivot assembly using the two bolts removed in
a
.
c.
Cut off the plastic zip ties which were connected to Hi-Lo pull tube for the purpose of shipping
Remove Bolts Attach the bolts again after connecting to pivot assembly
11.
Attach the slide rod extensions to both ends of the side frame with the plastic stop facing towards red trigger.
12.
Install the spring system to the slide rod extensions.
a
. Place one washer (
1”x 0.545” x 0.125”)
into stem of slide rod.
b
. Next, attach the bumper spring.
c
. Attach the final washer
(1”x 0.545” x 0.125”).
Summary of Contents for Stockton N1035P
Page 6: ......
