Check for damage or wear-off of the tension
rod.
Install the tension wheel, arm and bolt after
applying engine oil on the inner surface of the
spprocket wheel, and tighten the bolt of the
tension arm to the specified torque.
Install tension rod and spring.
Check that the seal ring is undamaged; install
the seal ring/bolt and tighten to the specified
torque.
Remove the sealing bolt and washer of the
crankcase.
Apply 1-2 ml of engine oil on the tension rod.
Specified torque: 25~30 N•m
REASSEMBLY
Specified torque: 15~17 N•m
●
●
●
●
●
●
E N G I N E
3 - 5 1
OIL
Engine oil
OIL
Engine oil
https://www.motomanuals.net/