Apply engine oil on the surface of starting
driven sprocket and needle bearing.
Mount the starting driven sprocket onto the
starting clutch, rotate the starting driven
sprocket; check the operation of the starting
clutch.
The starting driven sprocket should be able to
revolve clockwise and not counter-clockwise.
Install the starting drive and driven sprockets
as a whole.
Put the shaft snap ring into the slot on the
starting motor shaft.
A p p l y e n g i n e o i l o n t h e s t a r t i n g c h a i n
protector, guiding plate, and starting chain.
Install the starting sprocket plate and tighten
the bolt.
I n s t a l l t h e c h a i n g u i d i n g p l a t e a n d t h e
protector.
Remove the starting motor.
Remove the screws of oil separating cover.
DISASSEMBLY
TIMING CHAIN TENSIONER
●
●
●
●
●
●
●
●
●
●
E N G I N E
3 - 4 9
OIL
Engine oil
OIL
Engine oil
https://www.motomanuals.net/