Specified torque: 8~12 N•m
Specified torque: 15~18 N•m
RIGHT CRANKCASE COVER ASSY
CLUTCH ROD
Install the return spring and stop arm, then
tighten to the specified torque.
Install the clutch and the primary clutch as a
whole (refer to page 3-41).
Install the shaft and tighten the bolt.
Install the clutch rod, align the boss to the hole
on crankcase cover.
Put the new O-ring onto the bolt of clutch rod.
Install the washer and lock-up screw, and
tighten the lock-up nut to the specified torque.
●
●
●
●
●
●
E N G I N E
3 - 4 2
https://www.motomanuals.net/
