2.0mm
2.0mm
Buffer
REAR WHEEL
Service limit
Axial
Radial
Place the rear wheel on a revolving bracket,
check the radial run-out of wheel rim and
measure with dial gauge.
BEARING
Rotate the inner loop of the bearing by hand;
t h e r o t a t i o n s h o u l d b e s m o o t h w i t h o u t
abnormal noise.
Check if the outer ring of the bearing fits tightly
with the hub. If not, replace the bearing
immediately.
Note:
Replace the bearing in pairs.
●
●
●
●
DISASSEMBLY
Remove the rear brake drum cover assembly
from the right wheel hub.
Remove the buffer block and O-ring.
●
CHASSIS
5-20
https://www.motomanuals.net/
