99000-32050 : THREAD LOCK BOND“1342”
1342
Install the cylinder head and put a new sealing
gasket on it. Then, mount the head cover.
N O T E :
P u t t h e c o v e r o n t h e c y l i n d e r h e a d w i t h t h e
a r r o w p o i n t i n g d o w n w a r d s .
Install a new sealing gasket and cap-shaped
nut.
NOTE:
Position of copper washer.
●
●
●
●
●
●
●
Tighten the cap-shaped nut of cylinder head as
regulated.
Install and tighten the cylinder head nut to the
specified torque.
Rotate the crankshaft counterclockwise; align
the "T" mark on the generator rotor to the dent
on the left crankcase.
Specified torque: 8~12 N•m
Specified torque: 15~18 N m
•
Apply the engine oil on the timing chain.
Install the timing chain and the sprocket, apply
THREAD LOCK BOND “1342” on the bolt
thread of the sprocket; tighten it to the
specified torque.
Specified torque: 7~10
N m
NOTE:
Align the mark on the sprocket to that on the
cylinder head.
Copper
washer
E N G I N E
3 - 1 9
OIL
Engine oil
https://www.motomanuals.net/
