6-12
5
Over 12
8
12N6-3B
12V 5Ah
1.28±0.01 20
℃
0.5 A
BATTERY
SPECIFICATIONS
Type designation
Capacity
Standard electrolyte S.G.
In fitting the battery to the motorcycle, connect
the breather tube to the battery vent.
INITIAL CHARGING
Filling electrolyte
R e m o v e s h o r t s e a l e d t u b e b e f o r e f i l l i n g
electrolyte. Fill battery with electrolyte (dilute
sulfuric acid solution with acid concentration of
35% by weight, having a specific gravity of 1.28 at
20
)
up to indicate UPPER LEVEL. Filling
electrolyte should be always cooled below 30
before filling into battery. Leave battery standing
for half an hour after filling. refill additional
electrolyte if necessary.
Charge battery with standard charging current as
described in the table shown below.
℃
℃
Standard charging
current
Charging time
The charging time for a new battery is determined
by the number of months that have elapsed since
the date of manufacture.
Confirmation for date of manufacture
The manufacture date is represented with
numbers in 4 parts, standing respectively for
factory, year, month and batch number.
Adjust the specific gravity to specified value
when charging is almost complete.
Increase the electrolyte level to the upper limit by
filling distilled water when charging is completed.
Months after
manufacturing
Necessary
charging hours
Servicing
Visually inspect the surface of the battery
container. If any signs of cracking or electrolyte
leakage from the sides of the battery have
occurred, replace the battery with a new one.
If the battery terminals are found to be coated
with rust or an acidic white powdery substance,
then this can be cleaned away with sandpaper.
ELECTRICAL
6 - 11
Breather
pipe
Battery
https://www.motomanuals.net/
