6 - 20
Hanskamp AgroTech B.V. (the Netherlands)
www.hanskamp.nl/en
Pipefeeder
EN
24VAC & 12
-
24VDC
2.3.5 Maintenance Safety
Read and understand the applicable manual and all safety signs before you
connect power supplies to operate, maintain or adjust the PipeFeeder.
Only trained persons are permitted to maintain the PipeFeeder.
Switch off the electrical power supply by taking plug out of the power point and
secure the plug before you clean or do maintenance on the PipeFeeder.
Wear protective clothing and safety goggles when you do work on the pneumatic
system.
Make sure all the covers and guards are installed when maintenance work is com-
plete.
2.3.6 Safety Decals
General safety messages appear in this safety messages section. Specific safety
messages are in applicable parts of this manual when potential hazards may occur
if the instructions or procedures are not followed.
