Page EN-13
Loading automatic washing machines
Loading automatic washing machines
Loading laundry
NOTICE
Risk of fi re/damage!
Improper handling of the appliance
can lead to fi re/faults.
■
Never try to open the loading door
with force whilst a cycle is in progress
or once a cycle has ended. Open the
loading door only once it has been
automatically released approx. two
minutes after the cycle has ended.
1. Open the loading door by pulling the han-
dle slightly forward.
2. Load the laundry. Pay attention to the tips
on page EN-16.
Do not exceed the maximum load weight
allowed and do not wedge clothes between
the loading door and the rubber sleeve.
3. Push the loading door closed until you
hear it snap shut.
Adding detergent/care
products
• Pull out the dispensing drawer (1) and fill
the compartments as follows before the
cycle starts:
(1)
Dispensing compartment II (left)
– Dispensing compartment II is intended for
the main wash. Fill it with powder or liquid
detergent or anti-limescale agent for every
wash.
200
(d)
– If you wish to use liquid detergent, place
the partition (d) in dispensing compartment
II before filling.
Fabric softener/starch compartment
(middle)
– Dispense fabric softener or starch here ac-
cording to the information supplied by the
manufacturer.
Dispensing compartment I (right)
– Dispensing compartment I is only intended
for prewashes. Only fill if you select the cycle
‘Cotton with prewash’ , or have additionally
selected prewash with the button (7).
We recommend only using cycles with a
prewash cycle for very dirty clothing.
If you select with prewash, fill detergent
compartment I with ¼ of the detergent and
fill detergent compartment II with ¾ of the
detergent.
• Push the detergent drawer back in after
filling.
