Page EN-20
Care and maintenance
Cleaning the dispensing
drawer
NOTICE
Risk of damage to property!
Improper handling of the appliance
may result in damage.
■
The dispensing drawer and remova-
ble parts are not suitable for the dish-
washer.
1. Pull the dispensing drawer (1) out as far
as possible.
(16)
(1)
2. Press the release spot (16) down and pull
the dispensing drawer (1) out completely.
(17)
3. Remove the insert (17).
(18)
4. Remove the cap (18).
5. Rinse the dispensing drawer, the insert
and the cap under running water.
6. Remove any leftover detergent in the
drawer runner and compartments with
a small brush for dishes or bottles or a
toothbrush.
(17)
(18)
7. Replace the cap (18) and insert (17)
again correctly.
8. Push the dispensing drawer back into the
rinsing chamber.
Cleaning the water inlet filter
and replacing the gasket
NOTICE
Risk of damage to property!
Improper handling of the appliance
may result in damage.
■
Turn off the water intake tap after
each use, before cleaning the water
intake fi lter or replacing the seal. Oth-
erwise there is a risk of water dam-
age.
1. Switch off the appliance, pull the mains
plug out of the socket and close the valve.
2. Unscrew the water inlet hose from the
valve.