Page EN-26
Oven timer
Oven timer
Setting the clock
When starting up the appliance for the first
time or after a power failure, the display will
show
0:00
. The time must be set.
c
88:88
888
1. Tap the
sensor.
0
will flash on the hour indicator.
2. Turn the
dial until the display shows
the current hour (
0
-
23
).
3. To save the setting, tap the
sensor
again.
00
will flash on the minute indicator.
4. Turn the
dial until the display shows
the current minute (
0
-
59
).
5. To save the setting, tap the
sensor.
The time is set.
If you want to change the time already
set, for example, changing from daylight
savings time to standard time, proceed in the
same manner.
Countdown timer
Your oven can remind you to start cooking,
or tell you when your eggs are cooked. To do
this, enter a period of
0:01
to
9:59
hours. After
the time has elapsed, you will hear 10 signal
tones.
Please note that the countdown timer does
not switch the oven or hob on or off.
c
88:88
888
1. Tap the
sensor.
The indicator showing the current hour will
flash.
2. Turn the
dial until the display shows
the desired number of hours (
0
-
9
).
3. To save the setting, tap the
(
sensor
again.
The minute indicator will flash.
4. Turn the
dial until the display shows
the number of minutes (
0
-
59
).
5. Tap the
sensor.
The countdown will begin.
The display will show the remaining time.
After the set time has elapsed, you will
hear 10 signal tones.
To cancel the countdown, tap the
sensor twice.
