Page EN-23
Cleaning the hob
Something has boiled over on
the sensors
1. Switch the hob off.
2. Wipe up the material that has boiled over
using a soft rag.
3. Wipe the sensor surface with a slightly
damp cloth.
4. Wipe the sensor surface completely dry
with a paper towel.
5. Switch the hob back on.
If the sensors are dirty, e.g. if something
has boiled over, the hob may turn itself
off. You will hear a signal tone. If the
sensors are dirty or damp, they may not work.
Sugary or starchy food
residue, plastics or aluminium
foil
NOTICE
Risk of damage to property!
Sugary or starchy food waste, plastics
or aluminium foil may damage the hob
permanently and irreparably.
■
If this happens, remove the dirt from
the still-hot glass ceramic with a
sharp, commercially available scrap-
er. While doing so, protect hands from
burns with oven gloves or pot holders.
• Once the hob has cooled down, you can
remove stubborn dirt by using a specially
made, commercially available detergent.
• Treat the hob with a special care product
after cleaning.
Summary of Contents for 170 284
Page 34: ......
