4. Installation
<BASE>
The device should be installed on hard and flat place where anchor volts should be installed.
<INSTALLATION>
For the installation, please contact technical staff and get assistance from Hanil technical staffs.
For balancing, put a level on the top of the bearing pulley and check the balance. The space
between main body and wall should be at least 60cm and empty the front space.
<Electrical Wirings>
1.
Place the controller and control panel where easy to operate.
2.
After temporary wiring, check the operation in low speed.
The rotation direction of the motor is clockwise direction same with that of bowl rotation.
3. If the control panel or operating panel is to be produced, ask for the electrical drawing
to Hanil Scientific Inc.
4. Problems or overload can be easily recognized because all the parameters and status are
displayed on inverter.
[email protected] / [email protected]
ㅣ
4
Summary of Contents for J1250
