9.
Drag
Assembly
Follow reverse order on disassembly. Please make sure grease from but bushing hole by twisting
the grease cup.
Caution
1.
The bowl can be vibrates when the drag spring tension got weakened. Please replace it.
2.
The bowl also can be vibrate when there is unbalance on the bullet catch tension. Please also
replace it.
3.
If abrasion on the drag bushing is more than 1.6mm, please twist half cycle and reuse it. One
bushing can be used twice. Most of cases on the vibration caused by faulty bushing. Please
check dust or scratches during assembly.
4.
Please use high quality graphite grease on the drag bushing at the first 1/4 spin and every
2~3hours. (Please use edible grease)
5.
Please clean up the drag once in a week. Depending on the treating solution, you need to clean
up everytime it finishes working
19
ㅣ
Summary of Contents for J1250
