10.
Trouble Shootings
Damages on the belt damage
1.
Is there any damage on the bearing pulley, Idler pulley, or motor pulley? If so, please make
smooth using the emery paper.
2.
The belt doesn’t work on the upper or downer regions on the pulley? If so, adjust the location
of the Idler arm so that it spins in correct position on the Pulley.
Damages on the drag bushing
1.
Is the balancing of the machine is correct? Unbalancing creates big damages on the machine.
2.
Is the tension on all of the 6 bullet catches same?
Damages on the bowl boss sleeve
Unbalance happens to the bowl. Please refer to the followings
Bowl vibration
1.
Most balance caused by remaining residues on the bowl. Please clean up after every use. Most
of the case residues are remaining.
2.
Please check the damage on the bowl spindle connection part (Bowl top). Please don’t use
sandpaper and use knife or chisel.
21
ㅣ
Summary of Contents for J1250
