10.
Trouble Shootings
3.
Is there any damage on the spindle? If it is crooked or there is damage on the connection area,
please replace.
4.
Is there any abrasion on the three wing spring? If the tension on the spring got weakened, it
creates the unbalancing.
5.
Is there any abrasion on the bowl boss sleeve? If there is abrasion more than 1mm, it creates
vibration.
6.
Is there any abrasion on the drag bushing? If there is abrasion more than 1mm, it creates
vibration on the bowl.
7.
Is the tension on the bullet catch and drag spring is got weakened? Or is there any remaining
oil or debris got stuck on the bottom so that disturbing the tension?
8.
Is the neck of the bowl upper region is not crooked? Please contact technical staffs in Hanil.
9.
If there is abrasion on the bowl shell or bowl bottom, please contact technical staffs in Hanil.
10.
Other unclear vibration, please contact technical staffs in Hanil.
[email protected] / [email protected]
ㅣ
22
Summary of Contents for J1250
