![background image](http://html1.mh-extra.com/html/hangcha/xc-series/xc-series_operation-and-maintenance-manual_3669562036.webp)
31
Caution
Prevent the cover from clamping your
finger when closing the cover.
Warning
When performing maintenance under the
cover, be sure to turn off the key switch to
prevent electric shock. However, when
the hands, feet, head, and body do not
touch the components, in order to
diagnose the fault by hearing, it is allowed
to open the key switch and open the cover
at this time.
Fork locating pin
Fork locating pins are used for adjusting the
fork space. Pull up it, turn 180
0
and shift the
forks to the desired position.
Warning
The forks should be set symmetrically to
machine centerline and fork stoppers
should always be locked.
The lower beams of the fork carriage have
an opening section to load or unload forks.
Do not set the forks over the opening.
Check the bolt at the middle of the fork
carriage used to prevent fork load at the
opening.
Pedal and handrail for getting on and off
the truck
There equips with pedals for getting on and
off the truck on both side of the truck, and
handrail on left leg of overhead guard. Always
face the forklift when getting on and off.
Please use the handrail for safety.
Hydraulic fluid reservoir cap
The hydraulic fluid reservoir cap is located on
the left frame inside the cover. Open the
cover when adding oil. Fill clean hydraulic oil
through this oil filler. After filling, lock the cap.
1
2
3