8
Stepless regulation for the driving speed of the
forklift.
Slowly depress the accelerator pedal, the drive
motor will start running and the forklift will move
off. According to the pedaling force on the
pedal, the running speed can be adjusted
steplessly.
Caution
Release the accelerator pedal while
driving to perform soft braking.
Warning
Do not depress the accelerator pedal
before turning on the key switch,
otherwise the meter will display a fault.
Release the accelerator pedal, the fault
will disappear.
Brake pedal [11]
Depressing the brake pedal will slow down or
stop the forklift. Release the pedal and the
vehicle runs.
Caution
Avoid sudden braking. Sudden braking
can easily cause the vehicle to overturn or
the cargo to fall, resulting in a safety
accident.
Hand brake lever [12]
Pull the handle back to tighten it; push the
handle forward to loosen it. The handle must
be pulled tight before the operator leaves the
forklift.
Caution
In case of brake system doesn’t work or
emergency occurs, you can tighten this
lever to stop the truck urgently. Usually, it is
strictly forbidden to use the handbrake to
achieve service braking.
Steering wheel tilt lever[13]
