23
The multi-function display shows the battery
capacity, the service hours, the operating
mode, the travel speed and fault code and
steering angle etc. Graphic illustrations on the
multi-function
display
act
as
warning
indicators. Check fault code through the right
button.
Battery capacity display [A]
Displays the remaining capacity of the battery
as a percentage.
Caution
Timely charging is essential to maintain
the service life of the lithium battery.
Service hours display [G]
The hour meter starts counting when the
vehicle key switch is turned off. Minimum
resolution 0.1 hours.
Operating mode display [C]
As shown in the figure from left to right, this
indicator
respectively
indicates
S mode
→
P mode
→
E mode
.
S mode
,
P mode: power mode,
is used for
long-distance transport situations that require
greater power or speed.
E mode
: economic mode, all parameters are
optimized, power saving, suitable for long-
term work on a single charge, it is
recommended to work in this mode at
ordinary times.
Caution
⚫
The default mode of the system is
P mode. After each power failure,
no matter what mode it was before
the power failure, it will return to P
mode.
Travel speed or fault code display [D]
Travel speed display
It displays the travel speed of the vehicle
during normal operation.
Fault code display
When a fault occurs, it will automatically
switch to the fault code and analysis
description displayed on the fault interface.
Rear wheel angle display [E]
Display rear wheel angle in real time,
indicator turns as the rear wheel angle
changes. Rear wheel angle is
＋
90°~
－
90°.
The listed figure shows the position when the
real wheel is at -90° angle.
