29
seat backrest and pull the backrest angle
adjustment lever upward with left hand. Do
not release the lever until a proper position is
fitted to the seat by moving the body forward
or backward.
·Armrest adjustment
The inclination angle of the armrest can be
adjusted by turning the adjustment knob.
When the knob is turned outward, the front of
the armrest will lift. When the knob is turned
inward, the front of the armrest will lower.
Warning
⚫
Turn off the key before adjusting the
seat.
⚫
It’s prohibited to adjust the position of
the seat only when the truck stops.
⚫
In case of accident,
no seat adjustment is allowed in the
process of travelling.
⚫
Make sure the lever is moved
completely to separate the seat
structure
before
the
forward and rearward adjustment of th
e seat and angle
adjustment of seat backrest.
⚫
After adjustment, each
lever should
be back in place. Before using the tru
ck, make sure the lock of every part is
reliable.
Seat belt
·Fasten the belt
Belt was huddled up in the box. There is a
secondary action to draw out the belt. So you
may meet some trouble due to not be familiar
with it.
One kind of seat: it needs to press the white
circular button (with the words: press to
release) by one hand, then the belt can be
pulled out by the other hand and inserted into
the socket.
You may also meet another seat: the belt box
is adjustable. Rotate the belt box forward, the
belt can not be drawn out. Rotate the belt box
backward, the belt is drawn out. Insert the
belt into the socket of the other side. Rotate
the belt box forward again and then the belt
is in normal working position.
Please fasten the belt when get on the truck.
Meanwhile, get the back and waist close to
the seat. Don’t tie the seat in the abdomen.
Please don’t have the seat backrest tilted
excessively. Otherwise, the belt can not be
extended correctly.
Do not use knotted or twisted straps.
To tie the belt in the daily operation will
protect you when the truck turns over and
reduce the harm.
·Unfasten the belt
Press the red button (with the word PRESS)
in the socket with left
pollex, it’s unfastened.
·Check the belt
Check if the bolt that fixed belt is loosened.
Don’t press the belt on the hard or frangible
objects and prevent from grinding with the
sharp blade to avoid damage.
It is prohibited to remove any parts of the belt.
The belt used frequently needs to be checked
frequently.
