57
5 Lithium battery
5.1 Safety notice
1.1
It is strictly forbidden to touch the positive
and negative poles of the battery box with both
hands at any time to prevent electric shock.
1.2 Maintenance personnel are required to
hold a qualified electrician certificate issued by
the Safety Supervision Bureau and an
ENEROC maintenance authorization to carry
out maintenance operations.
1.3 Wear insulating gloves when operating and
maintaining the battery system, and it is strictly
forbidden to wear metal accessories such as
watches.
1.4 When cleaning the vehicle, it is forbidden to
directly flush the battery system to prevent the
battery system from malfunctioning after water
enters.
5.2 Installation instructions
2.1 Installation instructions, installers need to
hold certificates, wear labor protection supplies,
and pay attention to safety protection. Before
installing the battery system, ensure that the
low-voltage connectors of the battery system
are disconnected from the vehicle components.
Pay attention to safety protection when
connecting the power high voltage to prevent
the installer from getting electric shock during
the installation process. When installing the
battery system, it should be mechanically
hoisted and slowly installed into the battery
compartment of the vehicle. Be careful not to
crush the electrical box and external cables.
When connecting the battery system, avoid
high voltage positive and negative polarity
reverse connection, short circuit and other
phenomena. To remove the battery system
from the vehicle, make sure that the vehicle key
is turned off, and the high-voltage cables, low-
voltage connectors, and the vehicle are
disconnected.
2.2 Check after installation. After the battery
system is installed, check the limit pins and
fixing bolts of the battery system to confirm that
the battery system installation requirements
are met. Check that the high-voltage cables
and
low-voltage
connectors
are
correctly/reliably connected. Turn the vehicle
