70
5. Insert the charging gun into the lithium
battery socket, the charger self checks
and communicates with the lithium battery,
when the entire system is fault-free, in
about 15S, the inner relay attracts, starts
charging, and the charging indicator
illuminates, while the meter will display
charging
voltage,
charging
current,
charging time and charging failure
information.
CPD20/25/30/35-XD4-SI25
CPD20/25/30/35-XD4-SI21/26,
CPD15/18-XD4-SI16, CPD40/45/50-XD4-
SI28
6. The charger will automatically stop
charging after fully charged, output voltage
and output current on the meter is 0, press
the pause button, and then press charging
gun lock and pull the charging gun out. If it
needs stop charging without being fully
charged, first press the pause button, wait
until the charge current is reduced to 0A,
and then press charging gun lock and pull
the charging gun out.
7. Insert the charging gun to the charger lay-
down position, and pull down the charger
main input valve.
8. Close the rechargeable lithium battery
cover and truck charging door.
Warning
The charger connector should only be
inserted into the battery connector,
never into the vehicle connector.
