HANGCHA CPD10-A Operation And Maintenance Manual Download

Page: 4 / 82

CONTENT

Foreword

1. Appearance and the main components ........................................................... 1

2. Displays and Controls ....................................................................................... 2

Multi-function display ........................................................................................... 4

Controls ............................................................................................................. 12

Seat ................................................................................................................... 17

Seat Aware System(For CE) ............................................................................. 20

3. Nameplate and Safety Labels ......................................................................... 22

4. Technical Specifications ................................................................................. 24

5. Safety Instructions ........................................................................................... 29

6. Forklift Transport,Lifting

﹠

Towing ................................................................. 35

Transport ........................................................................................................... 35

Lifting ................................................................................................................. 35

Towing ............................................................................................................... 36

7. The Structure and Stability of Truck .............................................................. 37

8. Running-in of the new truck ............................................................................ 40

9. Daily Maintenance ............................................................................................ 41

10. Driving and Operation ...................................................................................... 45

Driving ............................................................................................................... 45

Traveling ............................................................................................................ 45

Turning .............................................................................................................. 45

Stopping or parking ........................................................................................... 45

Loading .............................................................................................................. 46

Stacking load ..................................................................................................... 46

Un-stacking load ................................................................................................ 47

Check after operation ........................................................................................ 47

11. Deposit .............................................................................................................. 48

12. Battery ............................................................................................................... 49

13. Maintenance summarization ............................................................................ 58

Preventive maintenance schedule ..................................................................... 59

Replace the key safe parts termly ..................................................................... 66

Table for bolts tightening torque ........................................................................ 67

Table for oil used in the truck ............................................................................ 68

14. The use, Install and Safety Rules of attachment ........................................... 69

15. Battery automatic filling water system(Optional) .......................................... 71

16. Related Safety Instruction and Standard(For CE) ......................................... 76

Summary of Contents for CPD10-A



















































































Search results

Summary of Contents for CPD10-A

Reviews:

Related manuals for CPD10-A

Brands by name

Popular brands

HANGCHA CPD10-A, Operation And Maintenance Manual

Search results

Summary of Contents for CPD10-A

Reviews:

Related manuals for CPD10-A

Brands by name

Popular brands