30
8.
Never attempt to work the controls unless
properly seated.
–
Before starting, adjust the seat so you can
get easy access to all hand and foot
control.
9.
Before starting up, make sure that:
–
Please fasten seat bolts.
–
The parking brake lever is applied
securely.
–
The forward-reverse lever is in neutral.
–
Before staring, make sure no one is under,
on and close to the truck.
–
Don‟t step the accelerate pedal or control
the lifting lever or tilting lever before
turning on power.
10.
Operate the controls smoothly. Avoid
sudden stops or turns.
–
It is dangerous to make a sharp brake.
Otherwise the truck has the possibility of
overturn.
11.
Pay attention to the route of the truck; be
sure to make a wide sight.
12.
Never allow other person(s) to ride on the
forks, pallets or on the truck.
13.
Taking account of the shape and material
of loads to be handled, use a proper
attachment and tools.
–
Avoid hoisting the load, with wire rope
hung on the forks or attachment, since the
wire rope may slide off. If needed, a
qualified personnel for slinging operation
should perform, making use of a hook or
crane arm attachment.
–
Take care not to protrude the forks out of
the load. The protruded fork tips may
damage or turn over the adjacent load.
14.
Know the rated capacity of your lift truck
and its attachment, if any, and never exceed it.
–
Do not use a man as an additional
counterweight. I
t‟s quite dangerous.
15.
Keep your mind on your work.
16.
Keep your head, hands, arms, feet and
legs within the confines of the operator‟s
compartment. Never stretch out for any
reason.
17.
The pallet and skid used should be strong
enough to endure the load. Never use
damaged or deformed ones.
18.
We afford all type of attachment, such as
rotating roll clamp, bale clamp, side shifter,
and crane jib etc. You should refit the truck
under ours license if you want. It is forbidden
to refit it by yourself.
