HANGCHA CPD10-A Operation And Maintenance Manual Download

Page: 17 / 82

can be controlled by tilt backwards angle of

lever and the lowering speed can be controlled

by tilt forwards angle of the lever.

Tilting lever [18]

Tilts the forks forward / backward.

The forks can be tilted by operation of this tilt

lever. Pulling on this lever backwards will tilt

the forks backwards, and pushing it forwards

will tilt the forks forwards. The tilt speed can be

controlled by tilt angle of the lever.

CAUTION



The tilt lock mechanism built in the

hydraulic control valve does not

allow the mast to tilt forwards while

the electricity is being shut down

even if the tilt lever is pushed

forwards.

Emergency disconnect switch [19]

Switches power supply on and off.

When happen emergency, presses down the

emergency disconnect switch, and then the

main power of the truck will be cut off, the truck

stops working.

CAUTION



Please don’t use the emergency

disconnect switch to substitute the

function of key switch.

Parking brake lever [20]

Secures the truck when stationary.

Use this parking brake lever to park the lift

truck. And the parking brakes are applied on

the front two wheels by pulling up on this lever.

To release the parking brakes, move the lever

forwards.

There is a micro switch at the left side of the

parking brake lever, tense the lever makes

running invalid.

For the truck of CE: if you leave the seat

without tensing the lever, it will warn and

remind you to tense the lever.

WARNING



If parking on a grade is unavoidable,

be sure to block the wheel.

Steering column positioning device [22]

Adjusts and fixes the steering column to the

required distance.

The tilting angle of the steering column is

adjustable to suit individual operators. Turn the

hand lever upward to release the steering

column and locked by turning it downward.

Brake pedal [23]

Decelerates the truck.

Press this pedal to slow or stop the truck. At

the same time, the brake light comes on.

CAUTION



No permitted to press the brake

pedal and the accelerator pedal at

same time, otherwise, it is harmful

Summary of Contents for CPD10-A



















































































Search results

Summary of Contents for CPD10-A

Reviews:

Related manuals for CPD10-A

Brands by name

Popular brands

HANGCHA CPD10-A, Operation And Maintenance Manual

Search results

Summary of Contents for CPD10-A

Reviews:

Related manuals for CPD10-A

Brands by name

Popular brands