Handler PT-6 FSS, Manual

Page: 72 / 106

5 - 9
To check spinners for proper rotation use the following procedure.
A) Start engine on tractor.
B)
Start spinners by pushing remote lever forward into the “Lower” position. Check to be sure
spinners are turning the proper direction (see drawing page 5)
C) If spinners are not turning proper direction switch hoses in remotes.
D)
When turning spinners “OFF” push Lever forward into the Float Position.
E) Never turn spinners
“OFF”
by pushing Lever into “Neutral” this will stop spinners
suddenly, not let them free spin to a stop and will damage spinner motors or tractor
hydraulic system.
If you are not certain how to hookup the pressure and return line contact Chandler Equipment Co.
or your local dealer.
NOTE: All Chandler Spreaders with the hydraulic spinner option will
run with an Open or Closed System. If running with an Open System
the ball valve underneath the flow control valve must be “ON”. If
running with a “CLOSED” System the ball valve should be “OFF”.
(See drawing page 5)