3–17
Cordless System Manual
Aux Format Editor Commands
Send Commands
F1 Send all characters followed by “xx” key or function code, starting from current
cursor position.
Syntax = F1xx (xx stands for the hex value for an ASCII code,
see Hex to ASCII Conversion chart, page 3–12.)
F2 Send “nn” characters followed by “xx” key or function code, starting from
current cursor position.
Syntax = F2nnxx (nn stands for the numeric value
(00-99) for the number of characters and xx stands for the hex value for an
ASCII code. See Hex to ASCII Conversion chart, page 3–12.)
F3 Send up to but not including “ss” character (Search and Send) starting from
current cursor position, leaving cursor pointing to “ss” character followed by
“xx” key or function code.
Syntax = F3ssxx (ss and xx both stand for the hex
values for ASCII codes, see Hex to ASCII Conversion chart, page 3–12.)
F4 Send “xx” character “nn” times (Insert) leaving cursor in current cursor
position.
Syntax = F4xxnn (xx stands for the hex value for an ASCII code,
see Hex to ASCII Conversion chart, page 3–12, and nn is the numeric value
(00-99) for the number of times it should be sent.)
E9 Send all but the last “nn” characters, starting from the current cursor position.
Syntax = E9nn (nn is the numeric value (00-99) for the number of characters
that will not be sent at the end of the message.)
Move Commands
F5 Move the cursor ahead “nn” characters from current cursor position.
Syntax = F5nn (nn stands for the numeric value (00-99) for the number of
characters the cursor should be moved ahead.)
F6 Move the cursor back “nn” characters from current cursor position.
Syntax = F6nn (nn stands for the numeric value (00-99) for the number of
characters the cursor should be moved back.)
F7 Move the cursor to the beginning of the data string.
Syntax = F7.
EA Move the cursor to the end of the data string.
Syntax = EA
Search Commands
F8 Search ahead for “xx” character from current cursor position, leaving cursor
pointing to “xx” character.
Syntax = F8xx (xx stands for the hex value for an
ASCII code, see Hex to ASCII Conversion chart, page 3–12.)
F9 Search back for “xx” character from current cursor position, leaving cursor
pointing to “xx” character.
Syntax = F9xx (xx stands for the hex value for an
ASCII code, see Hex to ASCII Conversion chart, page 3–12.)
E6 Search ahead for the last instance of “xx” character from the current cursor
position, then increment cursor.
Syntax = E6xx (xx stands for the hex value
for an ASCII code, see Hex to ASCII Conversion chart, page 3–12.)
E7 Search back for the last instance of “xx” character from the current cursor
position, then increment cursor.
Syntax = E7xx (xx stands for the hex value
for an ASCII code, see Hex to ASCII Conversion chart, page 3–12.)
Summary of Contents for SCANTEAM 2070 BASE
