![background image](http://html1.mh-extra.com/html/hand-held-products/scanteam-2070-base/scanteam-2070-base_manual_589770054.webp)
3–16
Cordless System Manual
Other Programming Selections
Clear One Aux Data Format
This deletes one aux data format for one symbology. If you are clearing
the primary aux format, scan 0. If you are clearing an alternate format,
scan 1, 2, or 3, depending on the alternate format you are clearing.
Scan the Terminal Type (refer to the Supported Terminals Chart on page
2–5), then 7, 2 (for the aux port I.D.), and the length of the format you
want to delete. That length aux data format for that symbology is
deleted and all other formats are unaffected.
Save
This exits, saving any Aux Data Format changes.
Discard
This exits without saving any Aux Data Format changes.
Aux Data Formatter Example
Five digit data is sent to the Auxiliary Port, however the host system can only
accept eight digit data. Three zeroes must be added to the beginning of the
Aux Port data.
Received
Must send
12345
00012345
Refer to the Aux Format Editor Commands on page 3–17 to format the
following example. The programming bar codes on page 3–19 and the
alphanumeric bar codes on the inside back cover are used to program the aux
data formatter.
Scan the Enter Aux Data Format bar code (page 3–19).
Scan 0 9 9 (all terminal types).
Scan 7 2 (the hex value for the aux port).
Scan 0 0 0 5 (the data length).
The Aux Data Editor Commands are:
Scan F 4 (see page 3–17 for a description).
Scan 3 0 (hex value for 0).
Scan 0 3 (indicating the 0 should be sent 3 times).
Scan F 1 to send the data, then 0 0 (the hex value for NUL).
Scan Save to end the Aux Data Formatting.
Summary of Contents for SCANTEAM 2070 BASE
