Hand Held Products SCANTEAM 2070 BASE, Manual

Page: 74 / 132

4–14 Cordless System Manual
Search Commands
F8 Search ahead for “xx” character from current cursor position, leaving cursor
pointing to “xx” character. Syntax = F8xx (xx stands for the hex value for an
ASCII code, see Hex to ASCII Conversion chart, page 4–11.)
F9 Search back for “xx” character from current cursor position, leaving cursor
pointing to “xx” character. Syntax = F9xx (xx stands for the hex value for an
ASCII code, see Hex to ASCII Conversion chart, page 4–11.)
E6 Search ahead for the last instance of “xx” character from the current cursor
position, then increment cursor.
Syntax = E6xx (xx stands for the hex value
for an ASCII code, see Hex to ASCII Conversion chart, page 4–11.)
E7 Search back for the last instance of “xx” character from the current cursor
position, then increment cursor. Syntax = E7xx (xx stands for the hex value
for an ASCII code, see Hex to ASCII Conversion chart, page 4–11.)
Miscellaneous Commands
FB Suppress all occurrences of up to 15 different characters, starting at the
current cursor position, as the cursor is advanced by other commands. When
the FC command is encountered, the suppress function is terminated. The
cursor is not moved by the FB command. Syntax = FBnnxxyy . .zz where
nn is a count of the number suppress characters in the list and xxyy .. zz is
the list of characters to be suppressed. (xx stands for the hex value for an
ASCII code, see Hex to ASCII Conversion chart, page 4–11.)
FC Disable suppress filter and clear all suppressed characters. Syntax = FC.
EB Toggles the auxiliary port on and off. This command is used when data is
normally transmitted out the main port, and needs to be temporarily sent out
the aux port. The first EB in a format string opens the aux port, temporarily
re-directing data transmission out the aux port. Send commands (F1, F2, F3,
F4) are then used to transmit data. A second EB command closes the aux
port and resumes normal data transmission through the main port.
Syntax
= EB.
E4 Replaces up to 15 characters in the data string with user specified characters.
Replacement continues until the E5 command is encountered.
Syntax =
E4nnxx
1
xx
2
yy
1
yy
2
...zz
1
zz
2
where nn is the total count of both characters to
be replaced plus replacement characters; xx
1
defines characters to be
replaced and xx
2
defines replacement characters, continuing through zz
1
and
zz
2
.
E5 Terminates character replacement. Syntax = E5.
FE Compare character in current cursor position to the character “xx.” If
characters are equal, increment cursor. If characters are not equal, no format
match.
Syntax = FExx (xx stands for the hex value for an ASCII code, see
Hex to ASCII Conversion chart, page 4–11.)
EC Check to make sure there is a numeric character at the current cursor position.
If character is not numeric, format is aborted. Syntax = EC.
ED Check to make sure there is a non-numeric character at the current cursor
position. If character is numeric, format is aborted. Syntax = ED.
EF Inserts a delay of up to 49,995 milliseconds (in multiples of 5). Syntax = EFnn
where nn is a count of the number 5 ms delays, up to 9,999.