Hand Held Products SCANTEAM 2070 BASE, Manual

Page: 69 / 132

4–9 Cordless System Manual
Prefix and Suffix Examples
Example 1: Add Suffix for Specific Symbology
To send a CR (carriage return) Suffix for UPC only.
Scan Add Suffix.
The Symbology Chart indicates that the Hex value of UPC is “63.” Scan
6 and 3 on the Programming Chart (inside back cover).
A “CR” is equivalent to “0D” (see the Hex ASCII Chart). Scan 0 and D
on the Programming Chart.
Scan Save.
Example 2: Add Suffix for ALL Symbologies
To send a CR (carriage return) Suffix for all symbologies.
Scan Add Suffix.
The Symbology Chart indicates that the Hex value for All Symbologies
is “99”. Scan 9 and 9 on the Programming Chart.
A “CR” is equivalent to “0D”. Scan 0 and D on the Programming Chart.
Scan Save.
Example 3: Add Prefix for Specific Symbology / Suffix for ALL
Symbologies
To send an HT (tab) Prefix for UPC only and a CR / LF (carriage return / line
feed) Suffix for all symbologies.
Scan
Add Prefix.
The Symbology Chart indicates that the Hex value of UPC is “63”. Scan
6 and 3 on the Programming Chart.
An “HT” is equivalent to “09”. Scan 0 and 9 on the Programming Chart.
Scan Add Suffix.
The Symbology Chart indicates that the Hex value for All Symbologies
is “99”. Scan 9 and 9 on the Programming Chart.
A “CR” is equivalent to “0D” and an “LF” is “0A”. Scan 0, D, 0, and A
on the Programming Chart.
Scan Save.
Example 4: To Clear a Specific Prefix Entry
The Cordless System is programmed to send a CR / LF (carriage return / line
feed) Prefix for all symbologies (Hex value, 99). This is one Prefix entry.
You’ve also programmed a “#” Prefix for UPC (Hex, 63). To clear the UPC
entry, but not the Prefix entry for all symbologies.
Scan the Clear Specific Prefix Prefix Selection bar code.
The Symbology Chart indicates that the Hex value for UPC is “63”.
Scan 6 and 3 on the Programming Chart.
Scan the
Save Current Changes Exit Selection bar code.