Hammond XK-5, Owner'S Playing Manual, Page: 19 / 174

19
HA<O> XK-5 Owner’s Playing Guide
CONNECTING THE CU-1 LESLIE SWITCH (purchased separately)
Connect the CU-1 to the CU-1 jack found on the
recessed Accessory Panel (see page 12).
CONNECTING THE EXPRESSION PEDAL
u
CONNECTING AN EXP-100F
CONNECTING THE CONTROLLERS
u
CONNECTING AN EXP-50/50J/20/30
UPPER
BANK KEY PATCH
PEDAL LOWER
UPPER
BANK KEY PATCH
PEDAL LOWER UPPER
BANK KEY PATCH
PEDAL LOWER
Connect the EXP-100F to the EXP. PEDAL jack.
NOTE: In order to use the EXP-100F Expression Pedal, the EXP-
SOURCE switch in the CONTROL Edit Menu must be set either to
“EXP. PEDAL” or “BOTH.” This is explained on page 117.
1. Make sure the power to the instrument is “OFF.”
2. Connect the EXP-50/20/30 to either the CONTROL 1 or
CONTROL 2 jack.
3. Set the [POLARITY] at “NORM.”
4. Turn the power to the instrument “ON.”
NOTE: In order to use the EXP-50, EXP-50J, EXP-20 or EXP-30, the
CONTROL MODE switch in the CONTROL Edit Menu must be set
to “EXPRESSION.” This is explained on page 116.
PHONES
HEAD CU-1
TO KEYBOARD PEDAL
Use the two thumbscrews provided with the CU-1 to secure
it to the underside of the Lower Manual.