manualshive.com logo in svg

Hammond XK-5, Owner'S Playing Manual, Page: 11 / 174

Share
Download
Hammond XK-5 Owner'S Playing Manual Download Page 11

11

HA<O>

 

XK-5

 Owner’s Playing Guide

u

 VIBRATO AND CHORUS

㉓

  UPPER Touch Tab

Turns the Vibrato/Chorus “ON” for the Upper Manual. (P. 64)

㉔

  LOWER Touch Tab

Turns the Vibrato/Chorus “ON” for the Lower Manual. (P. 64)

㉕

  VIBRATO & CHORUS MODE Rotary Knob

Selects the depth of both Vibrato and Chorus. (P. 64)

u

 HARMONIC DRAWBARS

These provide all the basic tones of the instrument. (P. 46)

㉖

  UPPER “A

<

“ DRAWBAR SET

Plays on the Upper Manual when the 

❿

 [UPPER] PRESET 

SELECTOR is “ON” and the 

⓭

 “A#” Preset Key is selected.

㉗

  UPPER “B” DRAWBAR SET

Plays on the Upper Manual when the 

❿

 [UPPER] PRESET 

SELECTOR is “ON” and the 

⓭

 “B” Preset Key is selected.

㉘

  PEDAL DRAWBAR  SET

Plays from a connected MIDI Pedal Clavier or from the Manual 

when the PEDAL TO LOWER feature is selected.

㉙

  LOWER “A

<

“ DRAWBARS

Plays on the Lower Manual when the 

❿

 [LOWER] PRESET 

SELECTOR is “ON” and the 

⓭

 “A#” Preset Key is selected.

㉚

  LOWER “B” DRAWBARS

Plays on the Lower Manual when the 

❿

 [LOWER] PRESET 

SELECTOR is “ON” and the 

⓭

 “B” Preset Key is selected.

u

 PERCUSSION

㉛

  ON Touch Tab

Adds the Percussion effect to the Upper Manual. (P. 58)

㉜

  SOFT Touch Tab

Selects “NORMAL” or “SOFT” Percussion Volume. (P. 58)

㉝

  FAST Touch Tab

Selects “SLOW” or “FAST” Percussion decay time. (P. 58)

㉞

  THIRD/SECOND Touch Tab

Selects “SECOND” or “THIRD” Percussion harmonic. (P. 58)

u

 MASTER EQUALIZER

㉟

  BASS Rotary Knob

Adjusts the gain of the bass range. (P. 74)

㊱

  MID FREQUENCY Rotary Knob

Adjusts the frequency of the middle range. (P. 74)

㊲

  MID GAIN Rotary Knob

Adjusts the gain of the middle range. (P. 74)

㊳

  TREBLE Rotary Knob

Adjusts the gain of the treble range. (P. 74)

u

 EFFECTS

㊴

  OVERDRIVE Touch Button

Turns the Overdrive effect “ON” or “OFF.” (P. 73)

㊵

  OVERDRIVE Rotary Knob

Adjusts the depth of the Overdrive effect. (P. 73)

㊶

  EFFECT Touch Button

Turns Multi-Effects “ON” or “OFF.” (P. 76)

㊷

  EFFECT AMOUNT Rotary Knob

Adjusts the amount of selected Multi-Effects. (P. 76)

㊸

  REVERB Touch Button

Turns the Reverb effect “ON” or “OFF.” (P. 76)

㊹

  REVERB DEPTH Rotary Knob

Adjusts the depth of the Reverb effect. (P. 76)

u

 MANUAL

㊺

 MANUAL

Square-front, “waterfall”-style keys, non-weighted, Virtual Multi-

Contacts (P. 95).  61 playing keys, 12 Preset Keys.

UPPER

BANK KEY

PATCH

PEDAL

LOWER

㉙

㉚

㉛ ㉜ ㉝ ㉞

㉟ ㊱ ㊲ ㊳

㊴

㊵

㊶

㊷

㊸

㊹

Summary of Contents for XK-5















































































































































































Reviews:

No comments