Hamilton CTK Programming Manual Download Page 93

Page: 93 / 135

Inactivity timeout:

This is the amount of time that the system must be inactive once a transaction has

been started before the transaction is reset and starts over.

Click the screen saver tab

Screensaver Brightness:

This is the percentage of how bright or how dim the screensaver appears. The

higher the percentage, the brighter the screen saver will be.

Screensaver Timeout:

This is the amount of time, in minutes, the HTK must be idle before the screen

saver will activate.

Screen Saver Video:

You have the ability to add a video to play when the screen saver initiates.

Click the Misc tab

Use 2 Factor in Subnet:

By turning this “ON”, it will now require the 2 factor authentication to remote

into the HTK from within its own network. This means that once you log into the HTK, it will email you a

Document #101-0243

02/01/18

Summary of Contents for CTK








































































































































Search results

Summary of Contents for CTK

Reviews:

Related manuals for CTK

Brands by name

Popular brands

Hamilton CTK, Programming Manual

Search results

Summary of Contents for CTK

Reviews:

Related manuals for CTK

Brands by name

Popular brands