Hamilton CTK Programming Manual Download Page 30

Page: 30 / 135

Enabled:

Should be marked “ON” if you want this Buy Up to currently be functional. Turning it “OFF” will

disable the buy up item.

Non Taxable:

Can be left alone if your HTK isn’t set up to charge taxes. If you do charge taxes, you can

select “ON” if you don’t want the Buy Up to add additional taxes turn it to “OFF”.

SKU:

This can be left alone unless you are using an

Ethervend

system of firing washes. If you are using

Ethervend, the SKU you choose will need to match the carwash systems proper SKU for the item as well.

Contact the wash manufacture for these settings. This would also be used with the Hamilton Hosted

Solutions.

Upgrade Mode:

Buy Up Items

allows the option of providing services after the initial wash package has

been selected.

Package Upgrades

allows the option to give customers that have a free or automatic

wash service (RFID and Codes) to upgrade their package for additional money if they wish. (If you

choose to use Buy Up Items, you cannot also use Package Upgrades)

Once you have completed these settings, click “Save” and “activate changes” to save the settings. Then

click the back button to the previous page. Continue to click Back until you are at the page you need.

*repeat these steps for each buy up item

Document #101-0243

02/01/18

Summary of Contents for CTK








































































































































Search results

Summary of Contents for CTK

Reviews:

Related manuals for CTK

Brands by name

Popular brands

Hamilton CTK, Programming Manual

Search results

Summary of Contents for CTK

Reviews:

Related manuals for CTK

Brands by name

Popular brands