Hamilton CTK Programming Manual Download Page 86

Page: 86 / 135

Gift Port:

This is auto filled by the factory and should not be changed, unless instructed by a Hamilton

customer service representative.

Credit Port:

This is auto filled by the factory and should not be changed, unless instructed by a Hamilton

customer service representative.

Gift Routing ID:

This is auto filled by the factory and should not be changed, unless instructed by a

Hamilton customer service representative.

Credit Routing ID:

This is auto filled by the factory and should not be changed, unless instructed by a

Hamilton customer service representative.

Once you have completed these settings, click activate changes to save the settings. Then click the back

button to the previous page. Continue to click Back until you are at the page you need.

Document #101-0243

02/01/18

Summary of Contents for CTK








































































































































Search results

Summary of Contents for CTK

Reviews:

Related manuals for CTK

Brands by name

Popular brands

Hamilton CTK, Programming Manual

Search results

Summary of Contents for CTK

Reviews:

Related manuals for CTK

Brands by name

Popular brands