Page 48 of 92
520008300 08/14
SmartServe™ Drink Mixers Service Manual
Removal and Replacement
4. Remove four nuts (5) and lockwashers (6) from control board (7).
5. Position the control board (7) to the left to access and disconnect the linear motor
connector (8).
6. Position the control board (7) on the standoffs (9) and install lockwashers (6) and
nuts (5).
6
5
7
7
8
9
7. Lift and rotate clockwise the power control assembly (10) until you are able to access
the rear of the power control assembly (10).
8. Mark and disconnect all wires (11) and connectors (12) from the control board (7).
9. Remove four screws (13) and control board (7) from the power control assembly (10).
13
10
11
11
12
12
12
7
To install the control board assembly:
1. Install the control board (7) on the power control assembly (10) with four screws (13).
2. Connect all wires (11) and connectors (12) to the correct location on control board (7).
