PSx3xxIO Instruction Manual
6
Driving the PSx3xxIO
rearward is prohibited (e.g. it’s not allowed to turn
the output shaft by an external force).
If the diameter of the drive shaft (-8, -14) is
not
specified with the device
name, the information applies for
all
drive shafts (applies for the entire
document).
x in the device name stands for a digit in the range 0..9.
‘
xx
’
in the device
name stands for a number in the range 10..999.
2.3 Pin assignment
In the housing cover of the PSx3xxIO, there is a 5-pin circular plug of the series
713/763 (A-coded) from Binder (
IO-Link Class B port
) present for the connection of
supply voltage and for communication via IO-Link.
For PSE34xx, in the housing cover, there is a 5-pin Harting grommet plug HAN4A for
the motor supply and a 5-pin circular plug of the Series 713/763 (A-coded) from
Binder for the control voltage and IO-Link.
A 4-pin plug of the series 718 from Binder serves for the connection of tip buttons
(optional).
Connector pin assignment for the power supply and IO-Link for PSx3xxIO
(Top view from
the outside)
1. +24V control unit
2. +24V motor
3. GND control unit
4. I/O-Link C/Q
5. GND motor
Connector pin assignment for the power supply and IO-Link for PSE34xxIO
(Top view from
the outside)
1. +24V motor
2. GND motor
3. -
4. -
5. Housing
(Top view from
the outside)
1. +24V control unit
2. -
3. GND control unit
4. I/O-Link C/Q
5. -
Summary of Contents for PS*3**IO series
Page 37: ...Instruction Manual PSx3xxIO 37...
