halstrup-walcher PS*3**IO series, Instruction Manual

Page: 17 / 37

Instruction Manual PSx3xxIO
17
Designation ISDU
Number Function Value
range Secu
red Delivery R/W
“Other” parameter group
General
purpose 171-180 10 freely-usable registers 16 bit yes 0 R/W
UMot limit 181 Voltage limit for Bit
‘motor power present’
in 0.1 V
180...240
16 bit yes 185 R/W
Temperature
limit 182 Temperature limit °C for overtemperature 10...70
16 bit
yes 70 R/W
Delivery state 193 Writing a "-1":
Sets the delivery state, without changing
the process data format (starts initial
reference loop, positioning on the
measuring range middle)
Writing a "-2":
Sets the delivery state, (process data
format, starts initial reference loop,
positioning on the measuring range
middle)
A new process data format is only active
after a "Reset" command or a restart!
Writing a "1":
Saves the parameters in EEPROM
Writing a "0":
No action
Writing a "2":
Sets the delivery state, without performing
an initial reference loop and without
positioning on measuring range centre
(process data format ISDU 116 to 1)
A new process data format is only active
after a "Reset" command or a restart!
Writing a "3":
Sets the delivery state, without changing
the process data format, without
performing an initial reference loop and
without positioning on the measuring
range middle
Read after booting:
0

memory contents correct
0

memory contents incorrect
Read after saving:
0

Save successfully completed
≠ 0 
Save is still running or completed
with error (saving can take up to 2000ms)
-2
…3
(When
writing)
0...2
(When
reading)

15 bit
no R/W