![background image](http://html1.mh-extra.com/html/hakko-electronics/monitouch-s8-series/monitouch-s8-series_hardware-specification_3317186071.webp)
6-4
1.
Error
Messages
4.
SYSTEM ERROR
When a system error is detected, the following error screen is displayed on the S8 series.
Error Code: XX
1:
Watchdog timer error
11:
Switch table error
30: Request for displaying full error
31: Memory allocation system error
32: General exceptions/MMU address system error
33: RTOS system error
34: Memory error
35: Inaccurate memory error
The source of the error could be one of the following three problems.
1) Program crash due to noise
2) Hardware problem
3) Bad program
If any of these errors occurs, contact your local distributor.
5.
Touch Switch Is Active
If the power is turned off while a touch switch is
activated, the error screen shown on the right is
displayed. Remove your finger from the screen.
If the error screen remains displayed, contact your
local distributor.
System Error screen
Summary of Contents for Monitouch S8 Series
