![background image](http://html1.mh-extra.com/html/hakko-electronics/monitouch-s8-series/monitouch-s8-series_hardware-specification_3317186029.webp)
2-14
5.
USB
Connector
Transferring Screen Data
Screen data can be transferred via USB-B (USB slave port).
Be sure to install the dedicated USB driver for the S8 series on the computer. For the installation
procedure, refer to “Installation Procedure of the Driver for Screen Data Transfer” on (page 2-14).
Connection Example
*1 Use a commercially available USB cable. You are recommended to use a shielded twist-pair USB cable of
5 m in length.
*2 When using the USB port on Windows 98, Windows 98 Second Edition or later is required.
Installation Procedure of the Driver for Screen Data Transfer
The installation procedure on Windows XP is described as an example below.
1. Connect the USB-B port of the S8 series (with power on) to the computer (with power on) using a
USB cable.
2. The message “Found New Hardware” and then the driver installation wizard appear on the
computer.
Select [No, not this time] and click the [Next] button.
USB-A
USB-B
S8
Computer
*2
USB cable
*1
Summary of Contents for Monitouch S8 Series
