Hakko Electronics Monitouch S8 Series, Hardware Specification

Page: 46 / 79

5-2 1. Before Operation
Transferring Screen Data to MONITOUCH for the First Time
The procedure for transferring screen data for the first time is explained below:
Transfer via USB:
Connect the USB cable to the USB slave port (USB-B) on the S8 series, and transfer screen data
from the computer.
* Before transferring screen data via USB for the first time, install the USB driver.
For information on the installation procedure, refer to “Installation Procedure of the Driver for Screen Data
Transfer” (page 2-14).
When the screen data has been transferred, the following screen is brought up. For details, refer
to “Main Menu Screen” (page 5-3).
USB-B
USB
Initial screen displayed when the power is turned on for the first time
Displays communication status between the S8 and the computer.
S808 S806