4
1. Coin-type Lithium Battery (S808C/S806C/S806M20)
4-1
Instruc
tions
1.
Coin-type Lithium Battery
(S808C/S806C/S806M20)
Battery Usage
The battery is used for the user memory area (non-volatile memory $L and $LD, storing sampling data,
etc.) in SRAM, or backup battery for the built-in clock.
Battery Voltage Drop Detection
The battery status is output to the internal memory $s167 of the S8 series.
When the battery voltage is lowered, the message “Replace a battery after saving SRAM.” is displayed
at the bottom center of the Main Menu screen. If the battery voltage drops (4th bit is set) before five
years has elapsed, replace the battery immediately.
Battery Replacement
Recommended Battery
It is recommended that one of the following batteries be used for replacement.
Safety Instructions on Handling the Battery
Lithium batteries contain combustible material such as lithium or organic solvent. Mishandling may
cause heat, explosion or ignition resulting in fire or injury. To prevent accidents, pay attention to the
following cautions when handling the lithium battery.
CAUTION
The battery is inserted upon delivery.
$s167
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
00
0
0
0
0
0
0
0
0
0
0
0
MSB
LSB
0
0
0
0
System reserved (setting: 0)
0: Battery OK.
1: Battery voltage drop, no battery
Recommended Manufacturer
Model
Mitsubishi Electric Home Appliance
CR2032
Coin-type lithium primary cell
Hitachi Maxell
Panasonic Corporation
FDK Energy
CR2032v
CAUTION
•
Be sure to discharge static electricity from your body before battery replacement.
•
Use the recommended battery for replacement.
•
Rough handling of the battery may cause fire or chemical burn hazard.
•
Do not disassemble, incinerate or heat the battery.
•
Observe local and governmental regulations when disposing of waste batteries.
•
Keep batteries out of reach of children. (If swallowed, immediately consult a doctor.)
•
Never re-charge the battery.
•
When the battery leaks or smells, the leaking battery electrolyte is flammable. Keep
from heat or flame.
Summary of Contents for Monitouch S8 Series
