Hakko Electronics Monitouch S8 Series, Hardware Specification

Page: 70 / 79

6
1. Error Messages 6-3
Error Handling
2. Data Loading
If an error is detected on the screen data in the RUN mode, the following messages are displayed on
the S8 series.
3. Warning
A message may be displayed on the Main Menu
screen. This is a warning message.
For the warning details and solutions, refer to
the
S8 Series Reference Manual
and correct screen
data.
Data Loading...
Screen No. Error
Screen No. Error Error : XX (XX : XXX)
Data Loading...
The screen data does not match the
SRAM area.
ERROR : 163 (24:0)
Error Messages Contents Solution
Screen No. Error
There is no setting for the
received screen.
At the start of communications, the S8 series regards the value
in the read area “n + 2” as the screen number.
Check that this value is an existing screen number on the
controller.
Error : XX (XX : XXX)
There is an error in the
created screen data.
According to the item number and the sub-item number
displayed on the S8 series, find the edited screen where the
error occurs. Check the contents of the error (error number)
and remove the error.
For details on the item number and sub-item number, refer to
the S8 Series Reference Manual.
Error : XX (XX : XXX)
Sub-item No.
Item No.
Error No.