Hakko Electronics Monitouch S8 Series, Hardware Specification

Page: 61 / 79

5
2. Main Menu Screen 5-17
MONITOUCH
Operations
7-3. Touch Switch Test
If a touch switch does not activate at all or if an operation is performed without pressing any touch
switch, check if the touch switches on the S8 panel are working properly.
1. Touch switch test screen:
Press the [Switch Test] switch. Grids appear on the screen as shown below.
2. Checking the switch output state:
Press a position on the panel, and check if the pressed position turns white. When the pressed
position turns white, the switch is activated normally. To move back to the I/O Test screen, press
the [Return] switch. To delete white dots, press the [Erase] switch.
* If a position different from the pressed position turns white, refer to “Touch Switch Adjustment”
on the next page and adjust the touch switch position.
Touch switch test screen
I/O Test screen
Touch switch test screen
Coordinates (0, 0)
Output coordinates
Displays the I/O Test
screen.
Deletes white dots.
Displays the Touch Switch
Adjustment screen.
*
Output coordinates